K8凯发(中国)

      Q5® Site-Directed Mutagenesis (E0554)

      New England Biolabs

      Published: 2022-02-14 DOI: 10.17504/protocols.io.bddfi23n
      AI 解读
      浏览 1634

      Abstract

      This is the protocol for the Q5® Site-Directed Mutagenesis Kit (E0554).

      Before start

      Steps

      Exponential Amplification (PCR)

      1.

      Assemble the following reagents in a thin-walled PCR tube.

      ABC
      25 μl RXNFINAL CONC.
      Q5 Hot Start High-Fidelity 2X Master Mix12.5 μl1X
      10 μM Forward Primer1.25 μl0.5 μM
      10 μM Reverse Primer1.25 μl0.5 μM
      Template DNA (1–25 ng/μl)1 μl1-25 ng
      Nuclease-free water9.0 μl
      2.

      Mix reagents completely.

      3.

      Transfer to a thermocycler and perform the following cycling conditions:

      Thermocycling Conditions for a Routine PCR:

      ABC
      STEPTEMPTIME
      Initial Denaturation98°C30 seconds
      25 Cycles98°C10 seconds
      50–72°C*10–30 seconds
      72°C20–30 seconds/kb
      Final Extension72°C2 minutes
      Hold4–10°C
      • For a Q5-optimized annealing temperature of mutagenic primers, please use NEBaseChanger™, the online NEB primer design software. For pre-designed, back-to-back primer sets, a Ta = Tm + 3 rule can be applied, but optimization may be necessary.

      Kinase, Ligase & DpnI (KLD) Treatment

      4.

      Assemble the following reagents:

      ABC
      VOLUMEFINAL CONC.
      PCR Product1 μl
      2X KLD Reaction Buffer5 μl1X
      10X KLD Enzyme Mix1 μl1X
      Nuclease-free Water3 μl
      5.

      Mix well by pipetting up and down.

      6.

      Incubate at Room temperature for 0h 5m 0s.

      Transformation

      7.

      Thaw a tube of NEB 5-alpha Competent E. coli cells On ice.

      8.

      Add 5µL from the "KLD Section" above to the tube of thawed cells.

      9.

      Carefully flick the tube 4-5 times to mix. Do not vortex.

      10.

      Place the mixture On ice for 0h 30m 0s.

      11.

      Heat shock at 42°C for 0h 0m 30s.

      12.

      Place 42On ice for 0h 5m 0s.

      13.

      Pipette 950µL into the mixture.

      14.

      Incubate at 37°C for 1h 0m 0s with shaking (250rpm,0h 0m 0s).

      15.

      Mix the cells thoroughly by flicking the tube and inverting.

      16.

      Spread 50µL-100µL onto a selection plate.

      17.

      Incubate 1h 0m 0s at 37°C.

      Note
      It may be necessary (particularly for simple substitution and deletion experiments) to make a 10- to 40-fold dilution of the transformation mix in SOC prior to plating, to avoid a lawn of colonies.

      推荐阅读

      Nature Protocols
      Protocols IO
      Current Protocols
      扫码咨询